I’m here to share with you how I made my bookmark for the 12 Hexies (or Less) Blog Hop.
I just love EPP (English Paper Piecing). It is a great way to keep my hands busy in the evenings when we watch a show. When I found this fabric, the little details like the bug jar and the footprints screamed to be fussy cut into hexies.
What you will need:
Cute scraps of fabric in an assortment of designs.
Felt one sheet, cut in half
Velcro (I like the sew in kind)
You can find great tutorials for basting your hexagons and even my little tutorial for stitching them together. I like to starch my fabric well, before I baste them onto my templates/paper pieces. It helps later with holding the shape after the paper comes out.
When you have this shape of three columns of 3, 4, 3 stitched together, press the combined shape well. Carefully take out the templates/paper pieces. Press well again.
With an applique stitch, applique the shape onto one layer of felt. I tried to center my applique on the felt. You are going to trim it up, so it doesn’t have to be perfect. Stitch a contrasting line of stitching about 1/4” all the way around the shape. I wanted this to look handmade, so I hand stitched this. You could certainly do this by machine. **You can wait to do the detail until you are stitching the two pieces of felt together. Since I wanted a thicker line and my thread was thin, I opted to do it twice. This is certainly not necessary.
Take about 5” length of the soft side of the Velcro and sew it down the center of the second piece of felt by machine. With your ribbon, fold one edge under about 1/4”. Sew a piece of the stiff side of the Velcro to the ribbon, covering the folded edge. This is just so you have a nice finished edge of ribbon that won’t unravel. Measure the books you tend to read. Start at the top of the cover, around the book and meet back at the top of the cover. I found that 15” seemed to be a good size length for the books I read. On the other edge of the ribbon, stitch a scrap of felt about 1 1/2” X 1”. This is to help hold the ribbon inside your felt sandwich so it won’t slip out.
Hand stitch the felt piece to the first piece of felt that now has the hexagons appliqued to the front side. Make sure you are not going through the front of the applique (the hexagons). It doesn’t have to look pretty. But you do want to make sure the ribbon is centered on the top of the applique shape. Think about the stiff side of the Velcro on the opposite end of the ribbon before you stitch this down.
Sandwich the bottom felt piece with the length of soft Velcro facing down, and the top piece with the applique facing up. (Wrong sides together). You will need to think about this step a little. The stiff ribbon end needs to wrap around the book and ultimately stick to the underside of your bookmark to hold in place. If you lay the stiff side of the Velcro UP when you are making your sandwich, this should be the right placement.
Stitch in the same holes as the initial detail stitching. Make sure the ribbon is sticking out of the top of the sandwich. Carefully trim around the completed shape through both layers of felt. Be careful when you are trimming the top edge with the ribbon sticking out. You don’t want to cut that ribbon off. I started trimming the shape on one side of the ribbon, cutting through both layers all the way to the other side of the ribbon. When I got to the ribbon edge, I simply cut the top layer first, flipped the shape over and cut the bottom layer second. Make sure not to cut through the ribbon.
To use it as a bookmark, lay the ribbon on the page you are holding. Stick the stiff Velcro end under the main shape.
Viola. You have a lovely hexie bookmark.
Check out the rest of the blog hoppers too and see what they are up to.